Inkjet Cleaning Videos
Unblock and Restore your Epson Printer

Video Description

How to Clean an Epson 3880 / 3800 / P800 Printer's Print Head
If your nozzle check is missing in the same place every time, it is likely that paper dust has traveled up under the head, and has dried the ink. Good quality inkjet ink is not air drying, and needs the inkjet paper coating to dry the ink - paper dust will do just as well! To clear this blockage, John demonstrates how to clean the underside of your printers print head using Magic Bullet Maintenance Fluid. You will need a J Cloth Pad and Magic Bullet Maintenance Fluid. Purchase Below:

Video Description

How to clean your Epson Pro 3800 / 3880 / P800 Pump Cap and Wiper Blade
If you have a smear or indistinct nozzle check print out, it could be that your wiper blade is not evenly cleaning the underside of your print head. John demonstrates how to clean your printers wiper blade using Magic Bullet Maintenance Fluid. You will need a J Cloth Pad, Scissors, Magic Bullet Maintenance Fluid. Purchase Below:

Video Description

How to Clean an Epson R3000 & SureColor P600 Printers Print Head
If your nozzle check is missing in the same place every time, it is likely that paper dust has traveled up under the head, and has dried the ink. Good quality inkjet ink is not air drying, and needs the inkjet paper coating to dry the ink - paper dust will do just as well! To clear this blockage, John demonstrates how to clean the underside of your printer’s print head using Magic Bullet Maintenance Fluid. You will need a J Cloth Pad, Scissors, Magic Bullet Maintenance Fluid. Purchase Below:

Video Description

How to Drill out Epson Inkjet Spigots with Micro Drill
Often the simple reason that you lose a complete colour channel on your inkjet printer is because the inkjet spigot that pierces the ink cartridge is blocked. Simply drill out the affected spigot with the correct size Micro Drill - purchase below...
This video illustrates this solution using an Epson R3000 printer.

Video Description

This video demonstrates how to unblock a blocked printer head. A blocked printer head is when Ink dries on a print head, usually with a mixture of ink and paper dust. Do not run multiple cleans as this in fact makes it worse, as even more ink dries out and wastes ink!

Magic Bullet Printhead Un-Blocker
Magic Bullet breaks ink particles down.
Directions as shown in video -
1 - Remove Cartridges and Power Cable
2 - Place a paper towel under head
3 - Use syringe to insert Magic Bullet into ink exit ports
4 - Replace Cartridges - Perform Nozzle Check

Video Description

A printer can sometimes become blocked under the head. This video shows you how to solve this

Magic Bullet Printhead Un-Blocker
Magic Bullet breaks ink particles down.
Directions as shown in video -
1 - Cut a cloth approx 50mm x 300mm
2 - Mover carriage across, place the cloth under head
3 - Lay cloth on platen, pull head across
4 - Draw Magic Bullet, apply on each side of cloth
5 - Pull the cloth back and forth for 10 seconds
6 - Repeat process until perfect Nozzle Check

Video Description

An essential piece of maintenance that is often forgotten on a printer is cleaning the pump cap. The pump cap is crucial in the general operation of a healthy inkjet printer. This video shows you how to clean the pump cap

Magic Bullet Printhead Un-Blocker

Directions as shown in video -
1 - Pump cap has 2 sections. Felt and Surround
2 - Draw 1ml of Magic Bullet, squirt onto Felt
3 - Allow Magic Bullet to soak for 10 seconds
4 - Gently dry with towel
5 - Soak cotton buds with Magic Bullet
6 - Clean Surround

Video Description

The wiper blade wipes under the side of the print head and often gets ink dry on it. A perfectly clean wiper blade is essential in the running of a reliable printer. This video shows you how to clean the wiper blade

Magic Bullet Printhead Un-Blocker

Directions as shown in video -
1 - With a flat screw-driver push to back of printer
2 - Soak cotton bud with Magic Bullet
3 - Wipe cotton bud either side of wiper blade
4 - If lots of dry ink wipe with screwdriver
5 - Lubricate with Magic Bullet
6 - Don't forget to place wiper blade back!

Video Description

The spit pad on a printer enables the head to clear ink after printing. A clean spit pad (sometimes known as a parking pad) in essential in the running of a reliable printer. This video shows you how to clean the spit pad.

Magic Bullet Printhead Un-Blocker

Directions as shown in video -
1 - Syringe 1/2ml of Magic Bullet onto spit pad
2 - Allow to soak for 30 seconds
3 - Dry with towel, do not touch film strip!
4 - Repeat 2 or 3 times
5 - Spit pad should be allowing head to clear itself

Video Description

The spigots on a printer often get ignored when cleaning a printer. This video shows you how to clean the spigots and get a perfect air tight seal between your printer and cartridge.

Magic Bullet Printhead Un-Blocker

Directions as shown in video -
1 - press ink change button, remover power cord
2 - Remove CIS, cartridges or refill cartridges
3 - Move carriage up
4 - Soak cotton bud, clean around spigots
5 - This clean will help enable a reliable nozzle check